2500 Fabric Coating Machine
The Fabric coating machine is designed in accordance with special requiremets of film coating bag in ton. The set consists of translational swing type plastic extruder, let off, tension bridle, laminating machine, takein machine and electric control cabinet.
Specail designed barrel screw with big ratio of length to diameter,good plastify property,high output.High precision and adjustable clothes rack type alloy steel die. The double working positions let off adapts tensile controlling and rectifies a deviation automatically. The increased tension device can spread the cloth level both sides. The on off between rolls adapts pneumatic control.
| |
| Coating Machine (SJFMZ-2500)Single T-Die |
| 120/33-2500 |
| Diameter of Screw | φ120mm |
| Speed of Screw | 30-70r/min |
| Width of Working | 2350mm |
| Working Speed | 20-100m/min |
| Coating Thickness | 0.01-0.05mm |
| Motor Power | 70kw |
| Heating Power | ≈99kw |
| Total Power | 199kw |
| Dimension (L×B×W) | 18.1m×12.9m×5.6m |
| Weight | 32912kg |
A. Host: Longmen type walking host frame
1) Screw 1set
Diameter of screw: 120mm separation type mixing type structure
Screw length to diameter ratio 33:1
Screw material: 38CrMoAlA, nitriding treatment
Heating method: quartz heating ring
2) Extruder main motor: 75KW WANNAN BRAND 1set
3) The main reducer 1set
Reducer type: Hardened gear grinding gear lubrication
Speed reducer ratio: 18.25
Reducer type: 280
4) Extruder motor 5.5KW 1set
5) Automatic vacuum feeding machine 1set
B. T-DIE (clothes rack type internal heating two-way adjustable die head) 1set
1) Die width: 2500 MM
2) Working width: MAX.2350MM
3) Die material: 5CrMnMo forging
4) The way of plug: the combination of internal and external plugging
Inside the block scope: on both sides of the 400mm
Outer block scope: self regulation
5) Heating mode: electric heating tube inserted heating mode
C. Double station unwinding machine 1) Double position roll - out rack and movable guide rail 1set 2) Automatic edge correction controller (range: +150mm) 1set 3) Diameter of put fabric: Ø65mm 2sets 4) Magnetic powder brake 2sets 5) Tension sensor 2sets 6) Fabric connct auxiliary roller device 1set 7) Unwinding roller Ø138 x 2500mm 2sets 8) Fabric pressing rubber roller Ø130 x 2500mm 2sets 9) Cylinder 4sets
D. FABRIC TENSION FRAME
1) Frame
2) Fabric guide roll Ø110 * 2500mm 2sets
3) Fabric guide roll Ø242 * 2500mm 2sets
4) Fabric brace bar roll Ø164 * 2500mm 2sets
5) Fabric brace spiral roll Ø110 * 2500mm 1set
6) Fabric pre-heating roller Ø400 * 2500mm 1set
7) Oil temperature controller (heating power: 18KW) 1set
8) Magnetic powder brake 1set
9) Rotating joint 1set
E. COMPOSTIE MACHINE
1) The main cooling roll Ø600 x 2500mm (inner water cooling) 1set
2) Silicone rubber roll Ø450 x 2500mm (inner water cooling) 1set
3) Water tank for silica rubber roll 1set
4) The water squeezing roller Ø270 * 2500mm (inner water cooling) 1set
5) Drive motor 22KW (WANNA BRAND) 1set
6) Reducer (cycloid reducer) 1set
7) Fabric brace spiral roll Ø110 * 2500mm 1set
8) Fabric guide roll Ø110 * 2500mm 5sets
9) Fabric brace roll Ø89 * 2500mm 1set
10) Roller pressing cylinder 2sets
11) Queezing water roll closing cylinder 2sets
F. EDGE CUTTING DEVICE
1) Disc cutter 2sets
2) Deceleration motor 0.55KW 2sets
3) Two sets of positioning and adjusting device 2sets
G.DOUBLE SIDE WIRE WINDING 1set
H. FABRIC WINDING DEVICE
MOTOR: WANNA BRAND
Frequency converter: HOPE
PLC:SCHNEIDER
TOUCH SCREEN: WEINVIEW
Contact Now
