Our plastic wire drawing machine series are specially configured according to the characteristics of different plastics, and are suitable for the production of PP, PE, PA, PVC, PMMA and other plastic wires. And optional PLC full-line control. The unique high mixing design of the screw ensures full plasticization and stable extrusion of the rubber. The hot and cold water tank is made of stainless steel, the drafting machine is a gear box type, and the monofilament drafting and shaping adopts an advanced hot air oven structure. The reasonable structure of the whole machine ensures the stable quality of monofilament molding.
The plastic wire drawing unit consists of a single screw extruder, a die, a cooling water tank, a wire drawing auxiliary machine and a monofilament winding machine, etc., which is suitable for the production of various plastic monofilaments.
PP Monofilament line WY-PME-80 | ||
1 | max. Extruding rate | 104kg/h |
2 | diameter of screw | 80mm |
3 | L/D ration | 33:1 |
4 | screw speed | 20-100rpm |
5 | die lip width | 38 holes |
6 | max. Producing speed | 120m/min |
7 | fiber scope( change spinneret plate) | 80-700tex |
8 | drawing ratio | 6-13 |
9 | main motor type | Y225S-4-B3 |
10 | main motor power | 37kw |
11 | main reducer type | ZLYJ225-16-V |
12 | power of unit system | appr.170kw |
13 | normal operation power of unit system appr. | 110-130kw |
14 | contour size (L*W*H) | 28*2*2.7M |
15 | total weight | 23T |
