 HomeNewsOperating procedures for plastic circular looms

Operating procedures for plastic circular looms

2022-01-13

Plastic circular looms will be widely used in the textile industry. The production efficiency of using plastic circular looms for textile activities will be very high. If we want to play the role of plastic circular looms, we need to first Learn how to operate it properly. In fact, the operation of the Plastic Circular Loom is not difficult. You only need to understand its operating procedures and operate it well.
1. Turn on the power switch, first close the electrical box door, connect the warp and weft control circuit, and turn the manual cloth winding switch to the interlocking position.
2. Check whether there is any foreign matter inside, press the jog switch intermittently to observe whether the shuttle runs smoothly, whether the weft thread on the shuttle can be inserted into the fabric correctly, whether there is no obstacle, and whether the sound of the weaving board is normal, etc.
3. Observe whether the position of the dragon whiskers is correct, if it is not correct, it should be readjusted.
4. When the jog operation is normal, press the linkage switch, and the weaving board enters the normal working state.
5. During normal use, the working condition of the oil pump and the operation of the whole board should be observed at any time. If there is any abnormal situation, the board should be stopped for maintenance in time to ensure stable operation.

Previous: Introduce the structure and composition of plastic wire drawing machine

Next: Problems to be paid attention to when using plastic circular loom