The disc sampler is used to sample samples of textile fabrics, non-woven fabrics, dust-removing bags, fabrics, etc., and calculate the weight per square meter by weighing with an electronic balance.
Applicable standards
GB/T4669 Textiles, woven fabrics, determination of mass per unit length and mass per unit area
How to use disk sampler
1, the fabric to be cut flat on the rubber pad, the disk sampler on the fabric, pull out the sampler on the locking device, rotation about 90 degrees, one hand hold the cover, one hand hold the corrugated hand wheel, and apply a certain pressure, and then clockwise rotation of the corrugated hand wheel (Angle is greater than 90 degrees), can be cut round sample;
2, sampling area: 100cm2, cut samples with electronic balance weighing grams, then *100 is a square meter of textile grams, very convenient.
Notes for disk sampler
1, the disc sampler blade sharp, do not put your hand on the bottom during use, in order to avoid damage;
2, the instrument cutting sample should be carried out on the rubber pad, the instrument is not used to wipe clean, put in the instrument box, so as not to damage;
3. After using the sampler, the device will be locked and rotated to the original position, so that the blade can not be exposed, so as not to hurt hands and other items.
